Pimpex Plastic supplies automatic injection blow molding machines, China origin.
The injection blow molding machines promoted by Pimpex Plastic , China are 1 station machines which are different from 3 stations injection blow molding machines supplied by our competitors.
Hereinafter we would clarify well the major difference of our 1 station machines and moulds with 3 stations machines and moulds.
For better understanding of our 1 station technology, you could find video file of our 1 station machines in http://www.plasticimpex.cn/video.htm
◆ If you buy 3 stations machines, you should buy 3 sets of mould cores for 1 set of mould, while ours require 1 set of mould cores for 1 set of mould only. Thus our mould is lower at cost and easy to maintainance.
◆ 1 station mould cores are installed vertically while 3 stations mould cores are installed horizontally. So when making preforms, the projective area of our 1 station mould is smaller than 3 stations mould's. That is, our mould requires less clamping force than 3 stations mould. For producing same bottles, our 1 station machines could save power much than 3 stations machines. Of course, our 1 station machines are more compact than 3 station machines. You could compare machines' sizes of our 1 station machines in http://www.plasticimpex.cn/PlasticMachinery/MachineryTechnicalData.htm with those of 3 stations machines.
◆ There would be 2 half-lines in the preform made from 2-parts injection mould of 3 stations mould which will influence finished bottles' appearance. While our 1 station mould is 1-part injection mould would produce non-half-lines preform. Many customers appreciate our bottles'appearance quality.
◆ Our 1 station machines usually require 1 set mould oil warming machine for 1 set main machine while 3 stations machines require 3 set mould oil warming machines for 1 set main machine. That is, our 1 station machines help you gain lower cost both on peripheral equipments and energy consumption.
◆ Our 1 station machines could produce bottles with minimum mouth diameter 4mm only and maximum 500ml bottles, in some special cases, 20,000-30,000 ml bottles could be made from our 1 station machines. While 3 stations machines could produce 5-300ml bottles only. our smallest 1 station machine could make 3-4 pcs 500ml bottles while 3 stations machines could not make any 500ml bottles at all.
◆ In one word, our 1 station machines have unique design, compact roomage, easy operation and maintainance, prices of main machines are very cheaper than 3 stations machines.
Hope above explanation could touch you some and wish you visit our factory soon for better understanding.
Hereinafter are excerptas from two emails sent to our clients to clarify the advantages of adopting our 1 station IBM machines NOT our competitors' 3 stations IBM machines.
Excerptas from email sent on Sunday, November 20, 2005.
The bottles samples you saw in the 3 stations IBM machines factory might be made from HDPE, LDPE not from PP.
Excerptas from email sent on Friday, November 18, 2005.
Thanks for your frank attitude and trust to negotiate with us about comparations with the 3 stations IBM machines. We know the 3 stations IBM factory well for years.
|Copyright © Pimpex@RPM Since 2004 www.plasticimpex.cn Sitemap Xiamen RPM Imp&Exp Co.,Ltd.|